Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please play nicely.  No one wants to listen/read a keyboard warriors rants....

Pages: [1]   Go Down

Author Topic: Wanted - ABS ECU for 3.0 manual  (Read 1136 times)

0 Members and 1 Guest are viewing this topic.

Dan-P

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 12
    • View Profile
Wanted - ABS ECU for 3.0 manual
« on: 10 October 2010, 14:33:22 »

I'm after an ABS ECU in good working order to fit a Y reg 3.0 manual facelift. Can pay by PayPal if easier.

Cheers,

Dan.
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24525
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: Wanted - ABS ECU for 3.0 manual
« Reply #1 on: 10 October 2010, 15:50:23 »

[movedhere] Test Zone [move by] Jimbob.

vauxfan2k

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • Western Isles
  • Posts: 1806
    • View Profile
Re: Wanted - ABS ECU for 3.0 manual
« Reply #2 on: 10 October 2010, 20:30:46 »

can you post up the numbers of your unit as it has to be the same type, there are a few variations.

cheers  ;)
Logged

Dan-P

  • Newbie
  • *
  • Offline Offline
  • Gender: Male
  • Shropshire
  • Posts: 12
    • View Profile
Re: Wanted - ABS ECU for 3.0 manual
« Reply #3 on: 10 October 2010, 21:21:21 »

Im not sure on the numbers, am i right in thinking these cannot be seen until the unit is removed? Or is it possible to view from anywhere while still fitted?
If not is there any way to work out which is the correct part number  :-/
Logged

sjc

  • Senior Member
  • ****
  • Offline Offline
  • Gender: Male
  • Alloa, Scotland
  • Posts: 730
    • Ultra-dull Audi TDi
    • View Profile
Re: Wanted - ABS ECU for 3.0 manual
« Reply #4 on: 12 October 2010, 20:06:52 »

You need to remove the control unit box as the part number is underneath - clever, eh?

Only a few torx bolts though - remove the ones you can see holding the cover down, remove the cover, and pull off the wiring connectors and lastly, remove the torx screw marked "+".  Should now lift off.

BTW, I only have a very early one and that certainly won't be what your after.
« Last Edit: 12 October 2010, 20:07:46 by sjc »
Logged
If you Elite an MV6, does that make it an MVee-leet?

scimmy_man

  • Omega Knight
  • *****
  • Offline Offline
  • Gender: Male
  • yorkshire
  • Posts: 1111
    • View Profile
Re: Wanted - ABS ECU for 3.0 manual
« Reply #5 on: 16 October 2010, 16:47:25 »

I have one off a 99 mv6 if any good?

still on the car so dont know the number.
Logged
Pages: [1]   Go Up
 

Page created in 0.009 seconds with 17 queries.