Omega Owners Forum

Please login or register.

Login with username, password and session length
Advanced search  

News:

Please check the Forum Guidelines at the top of the Newbie section

Pages: [1] 2  All   Go Down

Author Topic: CID problem with my Omega  (Read 2149 times)

0 Members and 1 Guest are viewing this topic.

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
CID problem with my Omega
« on: 10 July 2009, 14:38:46 »
I'm hoping someone can help me resolve a problem with my display. I bought the car at the weekend and had the common problem with the CID flickering etc, I managed to purchase an LCD screen (Sharp LQAW136t) from ebay but when I installed it the display was inverted (like a mirror image) I'm wondering if it can be fixed/programmed to correct it, don't really want to pay the £500 as quoted by my local VX garage.

Thanks in advance
Ryan
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24539
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: CID problem with my Omega
« Reply #1 on: 10 July 2009, 14:40:09 »
That has happened to someone here before, cannot remember the resolution though....
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24539
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: CID problem with my Omega
« Reply #2 on: 10 July 2009, 14:41:37 »
Logged

Jimbob

  • Global Moderator
  • *****
  • Offline Offline
  • Gender: Male
  • Chester / Flintshire
  • Posts: 24539
  • I like traffic lights, but only when they're green
    • E250 Est / Golf GTI
    • View Profile
Re: CID problem with my Omega
« Reply #3 on: 10 July 2009, 14:45:17 »
seems to either be a fault with the screen, or voltage on pins 5 & 6 causes the invertion
Logged

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: CID problem with my Omega
« Reply #4 on: 10 July 2009, 15:03:57 »
Thanks Jimbob for your fast responce, all I did was swap the LCD screen I have since found out that the replacement LCD screen was originally fitted to a Mercedes COMAND 2.0 would this be the problem?
Can the voltage be adjusted?
« Last Edit: 10 July 2009, 15:10:36 by ryan123 »
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107296
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: CID problem with my Omega
« Reply #5 on: 10 July 2009, 19:38:32 »
Press and hold MAIN for 8s, then release, then press BC, and post up the numbers.  Wonder if config is wrong, but fail to see how that can happen just by changing LCD :-/
« Last Edit: 10 July 2009, 19:38:41 by TheBoy »
Logged
Grumpy old man

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: CID problem with my Omega
« Reply #6 on: 10 July 2009, 21:19:38 »
Is there a configuration setting that can be changed to correct the display, have removed display to check connections, all looks fine.
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107296
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: CID problem with my Omega
« Reply #7 on: 10 July 2009, 21:33:33 »
Quote
Is there a configuration setting that can be changed to correct the display, have removed display to check connections, all looks fine.
Seem to recall Astra one is upside down.  BUT if all you have done is changed the LCD, and not the 2 boards, it won't be config...
Logged
Grumpy old man

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: CID problem with my Omega
« Reply #8 on: 10 July 2009, 21:46:03 »
Could the LCD have been configured differently as it came from a Mercedes comand unit?
Logged

TheBoy

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • Brackley, Northants
  • Posts: 107296
  • I Like Lockdown
    • Whatever Starts
    • View Profile
Re: CID problem with my Omega
« Reply #9 on: 10 July 2009, 21:51:21 »
Quote
Could the LCD have been configured differently as it came from a Mercedes comand unit?
the LCD is a std part
Logged
Grumpy old man

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: CID problem with my Omega
« Reply #10 on: 10 July 2009, 21:58:56 »
Will get the continuity meter out hopefully just a bad connection if not must be faulty main board or needs some sort of configuring the latter would be ok also.
My brains fried with this one LOL.  :'(
Thanks for all your help guys.
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: CID problem with my Omega
« Reply #11 on: 10 July 2009, 22:10:04 »
Pin 5 on the LCD is on the one to check (assuming its mirrored and not inverted, if the later then its pin 6). Both pins shoudl be low (unless the CID is inverting the image as standard which I cant comment on)

Data sheet is here:

http://document.sharpsma.com/Handler/getfile_handler3.asp?nodeid=Documents&fileid=691AA3A951FA42978148C28CB5799304
Logged

Ryan Hegarty

  • Junior Member
  • **
  • Offline Offline
  • Gender: Male
  • Kesh, County Fermanagh, N.I.
  • Posts: 116
    • View Profile
Re: CID problem with my Omega
« Reply #12 on: 10 July 2009, 22:28:58 »
Sorry for being dumb but what do you mean by being low?
Logged

Marks DTM Calib

  • Administrator
  • *****
  • Offline Offline
  • Gender: Male
  • West Bridgford
  • Posts: 34067
  • Git!
    • View Profile
Re: CID problem with my Omega
« Reply #13 on: 10 July 2009, 22:30:31 »
0V....i.e pulled to a low voltage.

So check for shorts in the connector etc and on the ribbon to the adjacent pin
Logged

pscocoa

  • Omega Baron
  • *****
  • Offline Offline
  • Gender: Male
  • Sandhurst Berkshire
  • Posts: 3761
    • Volvo V90 D5 & Grandland
    • View Profile
Re: CID problem with my Omega
« Reply #14 on: 10 July 2009, 23:01:03 »
I had flickering on mine 2 years ago. Got a replacement and went to TB - if I remember correctly there was an inverted image on that occasion and i sent the unit back to the German ebay supplier - I will try and find the emails but they had definitely done something wrong on the refurb - it came back within a couple of days and was fine.

Therefore the problem maybe one of the 2 on board pcbs and not a sharp screen problem.
Logged
[img name=signat_img_resize]http://[/img]
Pages: [1] 2  All   Go Up
« previous next »
 

Page created in 0.021 seconds with 17 queries.