Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[albitz]

Usually yes (remove them from the car first),but it depends how blocked they are.sometimes a good soak in petrol or similar helps if they are bad.A long,thin,stiff brush would be the ideal thing to push down the bigger one(s).

[Webby the Bear]

Usually yes (remove them from the car first),but it depends how blocked they are.sometimes a good soak in petrol or similar helps if they are bad.A long,thin,stiff brush would be the ideal thing to push down the bigger one(s).

Not sure what I'd do without you.... Lover. 

[omega3000]

Never done mine any harm , gunk ive used as well so all depends on how bad they are  On the prev mig the mayo had dried and blocked the pipes solid  No wonder the rocker gaskets blew when i put it in sports mode 

[Webby the Bear]

Never done mine any harm , gunk ive used as well so all depends on how bad they are  On the prev mig the mayo had dried and blocked the pipes solid  No wonder the rocker gaskets blew when i put it in sports mode 

I'm pretty sure I have some pipe cleaners I'm going to shove down there. If i need something a bit more ''industrial'' i'll raid the tool box 

When cleaning those 4 holes on the breather bridge (4 very small holes in the small circle thing lol) can i shove a needle down there and wiggle about to clean or would that do damage? 

[albitz]

Plenty of carb cleaner blasted down there should do the trick.

[omega3000]

If you mean the breather box , tbh i would use something plastic in the brass connector but it should clean easy with squirt from brake cleaner a few time or leave it to soak overnight 

Albs beat me to it 

[Webby the Bear]

Cheers all 

[omega3000]

Finally we have lift off , job done and firing on all 6 

What a mess ... !!



The culprit and 5 champion plugs and one NGK , the NGK was the hardest one to take out passenger side back . Someone never bothered with it on the last change 



A handy ratchet set up for the dispak bolts 



One for MR WEBBY ...the Y piece     



Took about half hour to fit the coil pack and nearly 2 hrs putting everything back together around it 

[dan-eboy]

Nice one! 

[TheBoy]

Another success story

[Webby the Bear]

Well done matie. Cheers for the Y pic. 

just posting up some pics in a few mins of some breather cleaning ive done today 

Well done EMD 

''OOF, and the dirt is gone''