Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[cem_devecioglu]

here is the solution which I'm going to buy

http://www.hirdavat.com/Eksantrik-Zimpara-Bosch-GEX-125-150-AVE-Eksantrik-Zimpara-125-150-mm-400-W-.html?mrk=1

http://3mcollision.com/products/abrasives/discs/3m-trizact-performance-sanding-disc-3000-grit-6-inch-01459.html

[dad1uk]

here is the solution which I'm going to buy

http://www.hirdavat.com/Eksantrik-Zimpara-Bosch-GEX-125-150-AVE-Eksantrik-Zimpara-125-150-mm-400-W-.html?mrk=1

http://3mcollision.com/products/abrasives/discs/3m-trizact-performance-sanding-disc-3000-grit-6-inch-01459.html

When I saw this Cem, I thought you had found something to polish the dents out of TB's car

[cem_devecioglu]

here is the solution which I'm going to buy

http://www.hirdavat.com/Eksantrik-Zimpara-Bosch-GEX-125-150-AVE-Eksantrik-Zimpara-125-150-mm-400-W-.html?mrk=1

http://3mcollision.com/products/abrasives/discs/3m-trizact-performance-sanding-disc-3000-grit-6-inch-01459.html

When I saw this Cem, I thought you had found something to polish the dents out of TB's car

unfortunately dents are beyond my profession

[omega3000]

here is the solution which I'm going to buy

http://www.hirdavat.com/Eksantrik-Zimpara-Bosch-GEX-125-150-AVE-Eksantrik-Zimpara-125-150-mm-400-W-.html?mrk=1

http://3mcollision.com/products/abrasives/discs/3m-trizact-performance-sanding-disc-3000-grit-6-inch-01459.html

When I saw this Cem, I thought you had found something to polish the dents out of TB's car

unfortunately dents are beyond my profession

EPOXY 

[dbdb]

You might try a Bosch PMF 190E http://www.tooled-up.com/review/bosch-pmf-190e-set-all-rounder-3-in-1-multi-tool-cuts-saws-sands-190w-240v/198475/

They don't rotate they vibrate

[cem_devecioglu]

You might try a Bosch PMF 190E http://www.tooled-up.com/review/bosch-pmf-190e-set-all-rounder-3-in-1-multi-tool-cuts-saws-sands-190w-240v/198475/

They don't rotate they vibrate

will check them thanks

[cem_devecioglu]

here is the solution which I'm going to buy

http://www.hirdavat.com/Eksantrik-Zimpara-Bosch-GEX-125-150-AVE-Eksantrik-Zimpara-125-150-mm-400-W-.html?mrk=1

http://3mcollision.com/products/abrasives/discs/3m-trizact-performance-sanding-disc-3000-grit-6-inch-01459.html

When I saw this Cem, I thought you had found something to polish the dents out of TB's car

unfortunately dents are beyond my profession

EPOXY 

  will ned lots to fill

[omega3000]

here is the solution which I'm going to buy

http://www.hirdavat.com/Eksantrik-Zimpara-Bosch-GEX-125-150-AVE-Eksantrik-Zimpara-125-150-mm-400-W-.html?mrk=1

http://3mcollision.com/products/abrasives/discs/3m-trizact-performance-sanding-disc-3000-grit-6-inch-01459.html

When I saw this Cem, I thought you had found something to polish the dents out of TB's car

unfortunately dents are beyond my profession

EPOXY 

  will ned lots to fill

For big dents use fiberglass matting , covers rust holes like magic too 

[cem_devecioglu]

after some physical search and talking to shops, ordered this one
http://www.lawson-his.co.uk/bosch-gex-150-turbo-150mm-6-professional--p85413

[cem_devecioglu]

after some physical search and talking to shops, ordered this one
http://www.lawson-his.co.uk/bosch-gex-150-turbo-150mm-6-professional--p85413

yesterday , package arrived .. it has a big box..  and a bit heavier than I expect..

tested the sanding function with 1500 grid on scratch resistent laquer for some hours..

it erased all previous scratches that I caused by hand

and later tested polishing function with farecla G3 ..

results are stunning to say the least.. never ever seen any laquer without  swirls

although for the polishing I was not patient enough so after some polishing used my rotary polisher to speed up the job but
really I liked it..  so 230 £ didnt fly out the window

and if you are going to sand and polish whole car with a scratch resistent laquer those machines are a must.. and whatever you do sanding by hand causes scratches and hard to remove with that kind of clearcoat

ps: dont believe in the ad its not quiet
 

[cem_devecioglu]

here are the pictures of trials/ tests

brief of whats done

sanding with 1500 grid without dual action (no rotary) - bosch gex 150

then polishing with G3 (rotary only) - hitachi

then polishing with  american eagle (no rotary) -bosch gex 150

final protector not applied

    *******

very close picture under sun


and some others

[omega3000]

Nice job cem  You need more filler on those dents though  Test panel i know 

[cem_devecioglu]

Nice job cem  You need more filler on those dents though  Test panel i know 

no filler jobbie can fill these ,  trust me

[omega3000]

If i had results like that i'd be running my own spray shop 

[cem_devecioglu]

If i had results like that i'd be running my own spray shop 

I dont think the car's owners patience will be enough to wait me for I complete the job..
 
a single hoods paint job took several steps and days (1 day primer (10-12 layer) ,next day sanding + base color coat (7-8 layer) , next day sanding + final color coat+ clear coat next day sanding and clear coat again, + 3-4 days for sanding & polishing nearly a week in total        
 
 ps: and thats done in 34-35 celcius avg temperature .. in a colder climate multiply the time by 2