News:

Please check the Forum Guidelines at the top of the Newbie section

Main Menu

So what have you done to your car today?

Started by Loo-knee, 28 April 2011, 21:20:22

Previous topic - Next topic

0 Members and 0 Guests are viewing this topic.

feeutfo

Quote from: TheBoy on 18 March 2012, 19:12:48
Got the Silver Bullet dirty. Very dirty. Looks like I've been rallying in it.

Had an oil level warning, so got to find a dealer around here as well.
Oh here we go... I'm not going under that thing for at least 6months.  ::)

doz

Spent all day making after market parts fit. I've been rebuilding the VW engine and honestly nothing has bloody fitted. Bolts to long, holes out of line. It's been a right ballsache all sodden day. I can't believe how long it's taken me to achieve very little    :( :(
If you have to ask you wouldn't understand

aaronjb

Quote from: chrisgixer on 19 March 2012, 18:31:11
Quote from: TheBoy on 18 March 2012, 19:12:48
Got the Silver Bullet dirty. Very dirty. Looks like I've been rallying in it.

Had an oil level warning, so got to find a dealer around here as well.
Oh here we go... I'm not going under that thing for at least 6months.  ::)

Just get him to take it through the car wash on the under body clean first ;) Although .. Silver Bullet is the Rusty Bullet isn't it? Might come out having had some significant 'lightening' carried out ;D

Remember to take the aerial off though if it's got a whip. Mine didn't survive the car wash on Sunday.  :-[ :-[ (Although I can't unscrew the aerial part anymore anyway :( )

feeutfo

Quote from: doz on 19 March 2012, 18:43:31
Spent all day making after market parts fit. I've been rebuilding the VW engine and honestly nothing has bloody fitted. Bolts to long, holes out of line. It's been a right ballsache all sodden day. I can't believe how long it's taken me to achieve very little    :( :(
Reading through Haynes on her old polo, there is talk of not undoing the head bolts, or the block will warp. Or something along those lines anyway....????

Right, I thought. That's getting sold then. Wtf? (16v 1.4cc petrol)

feeutfo

Quote from: aaronjb on 19 March 2012, 18:58:24
Quote from: chrisgixer on 19 March 2012, 18:31:11
Quote from: TheBoy on 18 March 2012, 19:12:48
Got the Silver Bullet dirty. Very dirty. Looks like I've been rallying in it.

Had an oil level warning, so got to find a dealer around here as well.
Oh here we go... I'm not going under that thing for at least 6months.  ::)

Just get him to take it through the car wash on the under body clean first ;) Although .. Silver Bullet is the Rusty Bullet isn't it? Might come out having had some significant 'lightening' carried out ;D

Remember to take the aerial off though if it's got a whip. Mine didn't survive the car wash on Sunday.  :-[ :-[ (Although I can't unscrew the aerial part anymore anyway :( )
I reckon it'll hold more water in the body work than wash of muck. More of a rusty sponge one might say. ;D

VXL V6

Utilised the extra horses now the CAT is no more!!!  :y

Cheers Loo Knee!

feeutfo

Quote from: VXL V6 on 19 March 2012, 19:47:23
Utilised the extra horses now the CAT is no more!!!  :y

Cheers Loo Knee!

Ooh, tell us more. :)

VXL V6

#2137
Well there's no requirement to have a Cat on a diesel as they only have a Smog test at the MOT, however, there was some talk of a visual inspection being introduced into the revised MOT test which means that the Cat would need to exist.

So following on from a thread on here from one of our European members with a 2.5 TD, Loo Knee has worked out the best way to remove the innards from the Cat and weld it back together in a non-obvious way so that the MOT tester won't spot it.

Now have both the cars De-cated which helps a lot with the pulling away from standstill and improves MPG, especially on the motorway, it also paves the way to a remap....  ::)

Oh and should add that it's sharper more defined steering now it's been Pollybushed!

paul.lovejoy

finally fitted out the omega van ready for tools now





Marks DTM Calib

Removed the wishbones from AA's car and pressed the rear bushes out (using a good vice and a little heat), there not to bad although one is slightly worse than the other.

jonnycool

If at first you don't succeed, skydiving probably isn't for you

paul.lovejoy

have to have a big van Jon becuase i  only have a little willy ;D ;D

aaronjb

Think you've got more shelf space in your van than I have in my whole garage.. house even! ;D

P.S. Fancy coming and making me some shelving? ;D

paul.lovejoy

cant wait to get my tools on them lol roll on tommorrow you can never have enough tools lmao what a knob i am at times

aaronjb

You're right about one thing.. I bought a Myford metal lathe at the weekend  ;D

Really do need to build some nice wooden racking and a workbench in the garage, though!