Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[omega3000]

Planned to do oil and filter change but chicken'd out as its too dam cold outside 

[jonnycool]

Took out the passenger side coil pack due to a misfire which prevented me using the car to go for a weekend away - presumed it was the coil pack getting wet from the scuttle - but it was bone dry 

Not misfiring at all now, after it made me use the wife's Pug 206 instead (a much tighter fit) 

[b4ndit]

Wired in the towbar all working

[Elite_L0ver]

Had a fight with a metal fence car came offworse  but its only small so im out tomorrow to see if i can buff it out 

[jonny2112]

Washed, clayed, polished, and partly waxed. 

[05omegav6]

Yet another service , only an oil and filter ones this time, but did the breathers, tidied up the brake vac hose where I'd changed the non return valve, (cheers to Andy B for posting summat about heating the pipe no more speed tape on it ). Also changed the Fuel Rail Pressure Valve, just to rule it out...time will tell.

[doz]

Drove it to Thruxton to watch the bikes. Me and the lad had a excellent time  He's turning into a right chip off the old block.

[Guinney1971]

topped the oil up and booked it in to LPG Conversions in Heanor for them to check the system over and give it a service.

[doz]

Managed to fix the rear blind  Thanks to Rob and his knackered Blind I managed to make two out of the one.

[pauls]

Big pat on the back for me managed to replace passenger side coil pack due to missfire. all srams to be good now

[Kevin Wood]

Yet another service , only an oil and filter ones this time, but did the breathers, tidied up the brake vac hose where I'd changed the non return valve, (cheers to Andy B for posting summat about heating the pipe no more speed tape on it ). Also changed the Fuel Rail Pressure Valve, just to rule it out...time will tell.

Was the pressure marked on the pressure regulator?

Also.. Did you check the part number on the injectors?

[05omegav6]

 

Yet another service , only an oil and filter ones this time, but did the breathers, tidied up the brake vac hose where I'd changed the non return valve, (cheers to Andy

B for posting summat about heating the pipe no more speed tape on it ). Also changed the Fuel Rail Pressure Valve, just to rule it out...time will tell.

Was the pressure marked on the pressure regulator?

Also.. Did you check the part number on the injectors?

Pressure regulator was 3.8bar but swapped over as had to remove one on car to read markings.

Injectors same p/n, left them on car as they don't seem to be the problem ie no injector codes

[05omegav6]

Poxy mobile posting

Eml has mostly stayed off but does come on eventually when idling for 5 mins or so

Codes are 0300, 0306

Any thoughts on the live data

[Kevin Wood]

Pressure regulator was 3.8bar but swapped over as had to remove one on car to read markings.

Injectors same p/n, left them on car as they don't seem to be the problem ie no injector codes

Hmm. I suspect that theory might have gone down the pan, then.

Any thoughts on the live data

Glad you reminded me about that. 

[Tonka.]

Cleaned out the breathers today. Got wet through as it chucked it down