Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[aaronjb]

You want Sikaflex 221 or 255, not that stuff which is designed for fitting windows to houses.

That or Tigerseal or Wurth Bond & Seal

[05omegav6]

And grey is soo '80s so be sure to get black

[EMD]

Looks like the devils bay again for the Sikaflex 221 

[Andy H]

You want Sikaflex 221 or 255, not that stuff which is designed for fitting windows to houses.

That or Tigerseal or Wurth Bond & Seal

That is what I bought it for. Nice to know that I bought the right stuff

[aaronjb]

You want Sikaflex 221 or 255, not that stuff which is designed for fitting windows to houses.

That or Tigerseal or Wurth Bond & Seal

That is what I bought it for. Nice to know that I bought the right stuff

  lucky, that. Of course if EMD sticks a spoiler on with it he might end up retrieving said spoiler from a live lane on a motorway  

[EMD]

You want Sikaflex 221 or 255, not that stuff which is designed for fitting windows to houses.

That or Tigerseal or Wurth Bond & Seal

That is what I bought it for. Nice to know that I bought the right stuff

  lucky, that. Of course if EMD sticks a spoiler on with it he might end up retrieving said spoiler from a live lane on a motorway  

Also i need it to stick so light fingered types dont rip it off 

[aaronjb]

With the three I mentioned and properly cleaned surfaces it won't be coming off without chunks of bodywork attached.. 

[05omegav6]

With the three I mentioned and properly cleaned surfaces it won't be coming off without chunks of bodywork attached.. 

Certainly the one I use is good to 150+

[Terbs]

Today I have removed both front door cards, and screwed the plastic retainingg strips to the door card, using small chipboard screws.
Had to do this on all three cars now, but at least the cards are now solid at the top and those confounded locking knob rattles are gone. Got it off to a fine art now

[steve6367]

Finished the condensor on the 2.5, dropped one of the copper washers for transmission cooler and had to pay £7 for a set in Halfords so I could finish it! Grrrr

Sat in ATS watching the refrigerant go in, so hopefully that part of the job is gas tight!

[Steve B]

Finished the condensor on the 2.5, dropped one of the copper washers for transmission cooler and had to pay £7 for a set in Halfords so I could finish it! Grrrr

Sat in ATS watching the refrigerant go in, so hopefully that part of the job is gas tight!

How many pennies do they want    formula 1 were £25 a few weeks ago.. had mine done there.

[Nick W]

Fitted my new bonnet struts, as I can't be arsed to change the strut bearings.
At least the bonnet stays up now.
I'm probably going to make an adapter to try my oil pressure gauge on the Omega next.
Although I might get a call to help with a Capri gearbox, which will be worth a couple of beers.

[EMD]

Drained the pond out ,the area under the pollen filter  Changed the pollen filter . Tried to polish the headlights "failed"  Fixed the loose battery  Found a used crank sensor in the boot 

[steve6367]

Finished the condensor on the 2.5, dropped one of the copper washers for transmission cooler and had to pay £7 for a set in Halfords so I could finish it! Grrrr

Sat in ATS watching the refrigerant go in, so hopefully that part of the job is gas tight!

How many pennies do they want    formula 1 were £25 a few weeks ago.. had mine done there.

I had a hunt around, but seem to have missed the winter offers - £45 here. Not sure I checked F1 though 

[minifreek]

Re-fitted the lowered suspension with spring assisters on the rears to help when the caravan is on... won't bottom out quite as much now

Ready for the summer season now, just need to wait for a cool day to give it a wash - clay bar - wash and polish