Individual rear seats fitted to TPC. Just waiting on some electrical bits to finish the multi contour wiring... The wires are all run through the cable trays, just the fuses and ECU plugs to connect up.
One slight snafu... When you press the switches to move the seats, there's a click from the ECU, so it's trying to do something, but nothing happens.
A quick scan suggests that the hall sensors on the motors aren't functioning. There's 8 motors and they can't ALL be bad... So suspect the ECU and/or sticking motors from lack of use, so further digging involved. Another ECU is only £25 so will start there. Current ECU is from a 2006, but the seats are slightly newer so it's possible there's a software issue. It didn't initially see the ventilated seats either, although that was just a tick box. Heating and ventilated parts all working so the car is happy with the switches.
The only immediate issue is that the headrest motors are out of position so I can't fit the headrests. But that's only an issue of anyone sits in the back, and that's not likely to happen anytime soon, and certainly not while the cars moving
